• Special care must be taken with any timber floor so as not to over wet, which could result in warping of the timber.
• First sweep or vacuum the area to be cleaned to remove loose dust and debris.
  • To remove shoe scuff marks or old wax coatings etc..., treat with Cleaning Warehouse's Tile Brite Stripper.
• For a high shine protective treatment apply either ;
  • Cleaning Warehouse's Liquid Floor Wax, also excellent on timber furniture, window frames and the like.
  • Cleaning Warehouse's Solid Floor Wax
• Leave to dry
  • Buff to a high shine using a microfibre sweeper mop, cloth or Kingfisher buffing machine.

    Alternatively use the Cleaning Warehouse's Dust Buster floor tool for a chemical free solution to cleaning timber floors.

• First sweep or vacuum the area to be cleaned to remove loose dust and debris.
  • To remove stubborn marks, shoe scuff marks or old wax coatings, treat with Cleaningwarehouse's Tile Brite Stripper.
    • Apply to the floor and scrub with the Kingfisher scrubbing machine (use black pads) to strip tiles back to the original tile finish or use a hand scrubbing pad for smaller area's.
• To clean the tiled floor
  • Using a mop or cloth, clean tiles with Cleaning Warehouse's Tile cleaner (50mls to 10L of water)
  • Leave to dry. No rinsing required
  
  
• Should you require a high shine, low slip finish apply Cleaning Warehouse's Tile Brite 24%, neat, directly to the floor using a spray bottle. No buffing required, instant shine.
  • Tile brite may also be added to water and mopped directly onto the floor.

• First sweep or vacuum the area to be cleaned to remove loose dust and debris.
  • To remove shoe scuff marks or old wax coatings, treat with Cleaningwarehouse's Tile Brite Stripper.
    • Apply to the floor and scrub with Kingfisher scrubbing machine to strip surface back to the original finish or use a hand scrubbing pad for smaller area's.
• Clean the floor
  • Using a mop or cloth, clean tiles with Cleaning Warehouse's Tile cleaner (50mls to 10L of water)
  • Leave to dry. No rinsing required
• Should you require a high shine, low slip, finish apply Cleaning Warehouse's Tile Brite 24%, neat directly to the floor using a spray bottle. No buffing required, for an instant shine.
  • Tile brite may also be added to water and mopped directly onto the floor.
  • As a cheaper but more labour intensive alternative to Tile Brite use
    • Cleaning Warehouse's Solid Floor Wax
    • Cleaning Warehouse's Liquid Floor Wax. Also excellent for timber surfaces.
    • Cleaning Warehouse's Spray and Buff. A quick drying polymer floor maintenance product.
      • Spray evenly onto the floor while using the Kingfisher buffing machine (use red pads)

For very heavily soiled floors and drive ways use Cleaning Warehouse's Floor Kleener

• Spray effected area's with Cleaning Warehouse's Floor Kleener (dilute 1:10 for painted area's), wait 5 - 10 minutes
• Work area with a stiff broom, for larger area's work area with water and a stiff broom
• Mop or rinse clean

• First sweep the area to be cleaned to remove loose dust and debris.
• Apply Cleaning Warehouse's Driveway Cleaner
  • Use undiluted (for painted surfaces dilute 1:10) by applying Cleaning Warehouse's Driveway Cleaner directly to the area to be worked.
    • For large area's dilute 1:5 and wet entire area with mixture.
  • Scrubb area with a stiff brush into a light foam
  • Leave for 5 -- 10 minutes.
  • Rinse off and area to dry

Hand washing

• First vacuum the area to be cleaned to remove loose dust and debris
• Prior to treating fabrics always test a small discreet area (preferably 24 hours before hand) for colour fastness.
• Dilute Cleaning Warehouse's Carpet Shampoo 1:30 with water
• Brush or sponge onto carpet with even strokes (do small area's at a time working back towards your entrance door, leaving the pile lying in the same direction)
• Avoid soaking the carpet/fabric
  Let the foam dry
• Remove foam reside and loosened dirt with a vacuum

Machine Cleaning

• First sweep or vacuum the area to be cleaned to remove loose dust and debris.
  • To remove shoe scuff marks or old wax coatings, treat with Cleaning Warehouse's Tile Brite Stripper.
    • Apply to the floor and scrub with the Kingfisher scrubbing machine (use black pads) to strip back to the original finish or use a hand scrubbing pad for smaller area's.
• To clean the Linoleum floor
  • Using a mop or cloth, clean with Cleaning Warehouse's Tile cleaner (50mls to 10L of water)
  • Leave to dry. No rinsing required
• Should you require a high shine, low slip finish apply Cleaning Warehouse's Tile Brite 24%, neat, directly to the floor using a spray bottle. No buffing required, for an instant shine.
  • Tile brite may also be added to water and mopped directly onto the floor.
• As a cheaper but more labour intensive alternative to Tile Brite use
• Cleaning Warehouse's Solid Floor Wax
• Cleaning Warehouse's Liquid Floor Wax
• Cleaning Warehouse's Spray and Buff. A quick drying, high shine, polymer floor maintenance product.
  • Spray evenly onto the floor while using the Kingfisher buffing machine (use red pads)